Phoenix Muscle Car, Phoenix Engine Rebuilders, Phoenix Engine Exchange.Rebuild your engine at Phoenix Engine Rebuilders.

CLICK HERE FOR OUR CRATE ENGINE CATALOG

ASK ABOUT OUR $179 POWER 1® CAM KIT !
VOTED BEST PRICING FOR THE PAST SEVEN YEARS!

    STOCK ENGINES, OLD SCHOOL, and RESTORATION ENGINES:

  • We can rebuild a stock engine to suit your needs and your pocketbook. There are many reasons to rebuild your engine rather than replace it. One of the main attractions is knowing what goes in your engine and how it was put back together; what parts went into your engine. You'll know your valve guides have been replaced, what rings are put in, how much the crank has been turned, what oversized bearings have been put in, and how much the cylinder has been bored. All PHOENIX ENGINE craftsmen work to the highest standards using quality parts and state-of-the-art machining equipment.

  • The following index is offered for your convenience as a guideline. Additional bolt-on accessories will result in price adjustments (example: intake manifold, oil pan, timing cover, or other requests up to a turn-key engine). Please note also that all information, including prices, are deemed current at time of posting, but are not guaranteed. Prices may change without prior website notice, so please call us for a complete customized estimate for your individual needs.

  • Please note we do not SELL long blocks, but we can use your core to build a crate engine or turnkey engine. Our terminology for crate engine is "intake to pan." This means when we build your engine we will put your intake on or custom intake, timing cover, valve covers, and oil pan. This seals the engine so we can pressure test the cooling system and the oil system before the engine is delivered. If you provide these parts then the price can be adjusted lower. You must call us for pricing.

  • Be sure to check our FAQs page for more details on pricing.

Index for Stock engine rebuilding, custom and performance engines:

CHEVROLET:

Auto - early non computer cars:
Starting from $1395, basic long block
(Block and heads only)
For your stock (early non computer) 350 Chevrolet we can build a quality engine. Note that the engine parts and machine work are of the highest quality. All our engines are handcrafted, not production built.
(Must have exchange or rebuildable core.)
If you want a little more power, upgrade to our Power 1 cam kit.
For even more power, upgrade to the full Power 1 engine (click HERE or call us for full details).

 

Pickup truck, Van or 4x4 - early non computer:
Starting from $1495, basic long block
We’d recommend our quality built 350 Chevy premium crate engine. 'Premium' designates heavy duty and above stock specifications in all such items as higher quality rings, bearings, timing, and oil components; all are above the basic crate engines.
(Must have exchange or rebuildable core.)
If you want a little more power, upgrade to our Power 1 "1014" cam kit.
For even more power, upgrade to the full Power 1 "1014" engine (call us for full details).
Return to Top of Page

 

Disclaimer: Please note that any information on this website, including pricing, is deemed accurate but is not guaranteed. Any pricing information is presented as a guideline only; you must call or email us for a customized estimate. Please click HERE for our full disclaimer.


FORD / BRONCO:

Auto - early non computer cars:
Starting from $1495, basic long block

For your stock (early non computer) 302 Ford we can build a quality engine that meets all your needs. Note that the engine parts and machine work are of the highest quality. All our engines are handcrafted, not production built.
(Must have exchange or rebuildable core.)
If you want a little more power, upgrade to our Power 1 cam kit.
For even more power, upgrade to the full Power 1 engine (call us for full details).

 

Ford Pickup truck, van or 4x4 or Ford Bronco - early non computer:
Starting from $1595, basic long block

We’d recommend our quality built 302 premium engine for your Ford pickup, 4x4 or Bronco. 'Premium' signifies heavy duty and above stock specifications in all such items as higher quality rings, bearings, timing, and oil components; all are above the basic crate engines.
(Must have exchange or rebuildable core.)
If you want a little more power, upgrade to our Power 1 "1015" cam kit.
For even more power, upgrade to the full Power 1 "1015" engine (call us for full details).
Return to Top of Page

Be sure to email or call us for a pricing estimate: 602 866-8044

Disclaimer: Please note that any information on this website, including pricing, is deemed accurate but is not guaranteed. Any pricing information is presented as a guideline only; you must call or email us for a customized estimate. Please click HERE for our full disclaimer.

 

 


 LOOKING FOR MORE POWER?
CHECK OUT OUR POWER ENGINE SERIES BELOW:

Looking for more power? Check out our POWER ENGINE® series, below. The following index is offered for your convenience as a guideline for base prices. Additional bolt-on accessories will result in price adjustments (example: intake manifold, oil pan, timing cover, or other requests up to a turn-key engine). Please be sure to telephone (602 866-8044) or email us to receive a customized estimate for your specific needs.

 


 

CHEVROLET / GM:

Power 1 Engine®
for small block engines such as GM 350 V-8
starting from $1495.

  • Horsepower projections: 275, 290, 300, depending upon carburation type, distributor, single or dual exhaust, and auto/standard transmission (Long block.)
    Must have exchange rebuildable core.
  • Custom cams: 440-460 lift. Multi-pattern, emissions friendly, developed by Phoenix Engine.
  • Please be sure to check out the COMPONENT section in the navigation menu above for more details on what is supplied with your engine.

Power 2 Engine®
for small block engines such as GM 350 V-8
starting from $1995.

  • Horsepower projections: 300 - 330, depending upon carburation type, distributor, single or dual exhaust, and auto/standard transmission. (Long block.)
    Must have exchange rebuildable core.
  • Custom cams: 450-470 lift. Multi-pattern, emissions friendly, developed by Phoenix Engine.
  • Please be sure to check out the COMPONENT section in the navigation menu above for more details on what is supplied with your engine.

Power 2 Engine®
for small block engines such as GM 383 V-8
starting from $2,345.

  • Horsepower projections: 350 - 375, depending upon carburation type, distributor, single or dual exhaust, and auto/standard transmission. (Long block.)
    Must have exchange rebuildable core.
  • Custom cams: 465-488 lift. Multi-pattern, emissions friendly, developed by Phoenix Engine.
  • Please be sure to check out the COMPONENT section in the navigation menu above for more details on what is supplied with your engine.

Power 3 Engine®
for small block engines such as GM 350 V-8
starting from $2695.

  • Horsepower projections: 360 - 406 or 409, depending upon carburation type, distributor, single or dual exhaust, and auto/standard transmission. (Long block.)
    Must have exchange rebuildable core.
  • Custom cams: 465-495 lift. Multi-pattern.
  • Please be sure to check out the COMPONENT section in the navigation menu above for more details on what is supplied with your engine.



Power 3 Engine®
for small block engines such as GM 383 V-8
starting from $2995

  • Horsepower projections: 375 - 426-427, depending upon carburation type, distributor, single or dual exhaust, and auto/standard transmission. (Long block.)
    Must have exchange rebuildable core.
  • Custom cams: 475 - 500+ lift. Multi-pattern.
  • Please be sure to check out the COMPONENT section in the navigation menu above for more details on what is supplied with your engine.

 

Return to Top of Page

 


Disclaimer: Please note that any information on this website, including pricing, is deemed accurate but is not guaranteed. Any pricing information is presented as a guideline only; you must call or email us for a customized estimate. Please click HERE for our full disclaimer.



FORD:

Power 1 Engine®
for small block engines such as Ford 302 V-8
starting from $1495.
(Please also see: Ford-04 for turnkey pricing and specs.)

  • Horsepower projections: 290 - 331, depending upon carburation type, distributor, single or dual exhaust, and auto or standard transmission. (Long block.)
    Must have exchange rebuildable core.
  • Custom cams: 460 - 480+ lift. Multi-pattern, emissions friendly, developed by Phoenix Engine.
  • Please be sure to check out the COMPONENT section in the navigation menu above for more details on what is supplied with your engine.

 


Power 1 Engine®
for small block engines such as Ford 351W V-8
starting from $1695.
(Please also see: Ford-04 for turnkey pricing and specs.)

  • Horsepower projections: 290 - 330, depending upon carburation type, distributor, single or dual exhaust, and auto or standard transmission. (Long block.)
    Must have exchange rebuildable core.
  • Custom cams: 460 - 480+ lift. Multi-pattern, emissions friendly, developed by Phoenix Engine.
  • Please be sure to check out the COMPONENT section in the navigation menu above for more details on what is supplied with your engine.

 


Power 2 Engine®
for small block engines such as Ford 302 V-8
starting from $2195.
(Please also see Ford-16 for turnkey pricing and specs.
)

  • Horsepower projections: 351 - 360, depending upon carburation type, distributor, single or dual exhaust, and auto or standard transmission. (Long block.)
    Must have exchange rebuildable core.
  • Custom cams: 470 - 490+ lift. Multi-pattern, emissions friendly, developed by Phoenix Engine.
  • Please be sure to check out the COMPONENT section in the navigation menu above for more details on what is supplied with your engine.

 


Power 2 Engine®
for small block engines such as Ford 351W V-8
starting from $2395.
(Please also see Ford-16 for turnkey pricing and specs.
)

  • Horsepower projections: 357 - 375, depending upon carburation type, distributor, single or dual exhaust, and auto or standard transmission. (Long block.)
    Must have exchange rebuildable core.
  • Custom cams: 475 - 500+ lift. Multi-pattern, emissions friendly, developed by Phoenix Engine.
  • Please be sure to check out the COMPONENT section in the navigation menu above for more details on what is supplied with your engine.

 


Power 3 Engine®
for small block engines such as Ford 302 V-8
Please click on this link: Ford-14 for pricing and specs, as these engines are sold only as TURNKEY ALUMINUM HEAD engines.

 


Power 3 Engine®
for small block engines such as Ford 351W   V-8
Please click on this link: Ford-14 for pricing and specs, as these engines are sold only as TURNKEY ALUMINUM HEAD engines.
Return to Top of Page

 


Disclaimer: Please note that any information on this website, including pricing, is deemed accurate but is not guaranteed. Any pricing information is presented as a guideline only; you must call or email us for a customized estimate. Please click HERE for our full disclaimer.


 

 

CHEVROLET BIG BLOCK, MUSCLE CAR, 4 X 4:

Big Block Chevy 454 cubic inches Iron Head engines
Power 1®, Power 2®, Power 3®, Power 4®, and Power 5® Engines:
Pricing: These engines are only sold as IRON HEAD CHEVY ENGINES in turnkey packages.
Please click this link: Chevy-30 for pricing.

· Must have exchange or rebuildable core.
· Custom cams: Please refer to the link above.
· Please be sure to check out the COMPONENT section in the navigation menu (above) for more details on what is supplied with your engine.


Big Block Chevy 454 cubic inches Aluminum Head engines
Power 3®, Power 4®, Power 5®, and Power 6® Engines:
Pricing: These engines are only sold as ALUMINUM HEAD CHEVY ENGINES in turnkey packages.
Please click this link: Chevy-35 for pricing.

· Must have exchange or rebuildable core.
· Custom cams: Please refer to the link above for cam specs.
· Please be sure to check out the COMPONENT section in the navigation menu (above) for more details on what is supplied with your engine.

Return to Top of Page

 


Disclaimer: Please note that any information on this website, including pricing, is deemed accurate but is not guaranteed. Any pricing information is presented as a guideline only; you must call or email us for a customized estimate. Please click HERE for our full disclaimer.

 


Ask about our
BIG BLOCK POWER 1® CAM KITS
starting at only $199 !


PhoenixEngine.com
21632 N 7th Ave, Suite 1, Phoenix AZ 85027

SW corner of 7th Ave & Deer Valley Rd,
right across from Deer Valley Airport entrance.
602 866-8044 or toll free 888-766-8044
email: phxengine@aol.com

| Stock Engine Pricing | Muscle Car Engine Pricing |
| Pickup/4x4/Van Engine Pricing | Crate Engines | Machine Shop Pricing |
| Engine Components | Criteria |Contact Us | FAQs |
| About Us | Testimonials | Home Page |



Disclaimer: Please note that any information on this website, including pricing, is deemed accurate but is not guaranteed. Any pricing information is presented as a guideline only; you must call or email us for a customized estimate.


3/22/13 pc, txt
7/15/15 pc, txt, page revamp
7/17/15 txt, 7/27/15 formatting
4/5/16 txt,rmvd pricing, add links
2/10/17 removed "Click on this Link"
until R gives pagelink info,
2/10/17 remv AMC etc, info &menusx2
3/16/18 pc
3/20/18 pc,txt