MAIN PHONE NUMBER: 602-866-8044

THIS IS THE FORD-27 PAGE.

FORD 351 — 427 HP
MIDNIGHT TURNKEY ENGINE

PERFECT for a COBRA KIT CAR or ANY KIT CAR of your choice!

Base Pricing of engine, before turnkey addition:
427 HP: $5995 — 442 ft/lbs torque

Turnkey packages for this engine start from $1595 to $1695 to $1795.

A "Crate Engine" means "Intake to Pan." This engine is a turnkey engine package, based on your application needs.

This POWER 4® engine is part of our PERFORMANCE ELITE ROLLER CAM series.
This is a radical high performance engine guaranteed to wake up the neighbors!

Click HERE to learn more about FAST TRACK!

Ask about our Fast Track Startup:
That means this engine can be Real Ready to Run OUT OF THE BOX if you choose our Fast Track startup, which includes break in, super tuning, jetting, and more.

BE SURE TO CHECK OUT THIS SAMPLE VIDEO OF A FAST TRACK SUPER TUNING:

THIS IS ONE OF THE BEST HOT STREET ENGINES YOU WILL FIND! GREAT OLD SCHOOL SOUND.

This Power 4® Engine Combination is a GREAT Replacement for a Mild to Hot Street. It has a ROUGH idle; Comp or Howards Cam Kit CAM that puts out 427+ HP at 5900 rpm and 439 to 470 ft lbs of torque. (Depends upon intake and cam application.) You WILL need a 2800 to 3200 Stall Speed Convertor.

This is an excellent engine for KIT CARS, MUSCLECARS, STREETS, HOT RODS, CUSTOM TRUCKS, 4X4, & JEEPS.

THIS ENGINE WAS BUILT FROM ONE OF OUR DYNO TESTED AND ROAD PROVEN PACKAGES. Your specific engine can be Dyno tested for an additional charge.

PLEASE CALL US ABOUT HIGHER HORSE POWER !!

For Bronco, 4x4, JEEP or Ford 4-wheel drive Trucks

SPECIAL FEATURES:

1. New Dart, ProFiler, or ProHeader Aluminum racing performance heads.
2. Aluminum Ford 23° racing cylinder performance heads.
3. Thicker deck surface for great cooling and improved sealing.
4. 190cc to 210cc intake runner ports are port matched to the intake, depending upon the application.
5. 70cc exhaust ports for better flow.
6. 60 cc combustion chambers.
7. High performance stainless steel stem intake valves 202.
8. High performance stainless steel stem exhaust valves 1.6.
9. Comp screw in studs and guide plates, center spec.
10. New bronze valve guides, step locked for no slipping.
11. ProRace, Scorpion, or Speed full roller rocker arms 1.6, hardened retainers and keepers.
12. Matched hardened Molly push rods for the correct length.
13. 10.5 or 10.7 to 1 KEITH BLACK hypereutectic PISTONS.
14. Forged pistons are also available for an extra charge.
15. This engine is a seasoned block, hand picked.
16. STEEL FORGED RODS with ARP rods, bolts.
17. NODULAR CRANK pro turn, micro polished.
18. NEW Professional Products RPM single or dual plane intake manifold.
19. Air gap single plane aluminum intake manifold.
    Please note for higher rpm and top end only:
    We've found that the single plane does much better than the dual plane Edelbrock intake on our Dyno!
20. NEW Holley Carb 750 CFM with electric choke is best for max horsepower.
21. NEW Edelbrock Carb 750 CFM with electric choke.
    Note: manual choke carburetors and double pump carburetors are optionally available for an extra cost.
22. Choice of 5 distributors:
    Pertronix Stage 1 is included in price;
    Pertronix Billet Stage 2 is extra;
    Pro Street HEI distributor is included;
    MSD 2 pack is extra;
    MSD 6AL 3 pack is extra.
23. Spark plug wires, spark plugs, High performance.
24. Spark plug wires, spark plugs, high performance.
    
25. Water pump is standard, high volume is extra.
    
26. New chrome air cleaner included. Custom air cleaner extra.
    
27. New Ford race or Cobra valve covers are included now for a short time only in the classic valve cover series!
    Please note that aluminum valve covers are extra.
    
28. New aluminum timing cover.
    
29. New Milodon 7 qt oil pan included... this is a Must!
    Please note: 7 qt pan helps the engine stay cool, as proven on our Dyno, and it helps keep drafting the oil pan dry at high rpms.
    
30. New water pump, chrome pulleys.
    
31. Fuel pump is not included.
    
32. Starter is not included.
    
33. This engine is built from one of our Dyno tested and road proven packages. Your specific engine can be Dyno tested for an additional charge.
    
34. Call for info on flex plate or fly wheel.
    
35. New Pro Race high performance harmonic balancer.
    
36. Call for correct flex plate on automatics.
    
37. Call for info on standard transmissions (4, 5, or 6 speed, etc).
    
38. Comes complete, intake to oil pan. Some assembly may be needed.
    
39. Air Gap single plane aluminum intake manifold.
    Note: We found that the single plane did much better than the dual plane Edelbrock on our Dyno testing!!
    
40. Aluminum valve covers are included, Custom aluminum Ford racing or Cobra new style valve covers are available. (Please note the covers shown in the photos are no longer available.)>>>
41. This POWER 4® engine comes completely assembled, intake to oil pan.
42. Engine Will Run on Premium unleaded fuel.

ENGINE PARTS include:

1. Power 4® Comp or Howards Cam kit 520 to 550+ .
2. Power 4® Seal Power, Comp or Howards hydraulic lifters.
3. Power 4® spring set, heavy duty (980 series spring sets).
4. New Aluminum Heads (see details above).
5. Hp Steel Stem intake valves 202.
6. Hp Steel Stem exhaust valves 1.6 .
7. Premium positive valve seals, Blue Viton.
8. Heavy duty roller timing chain.
9. Controlled internal oil system (a P.E.R.® exclusive)!
10. Heavy duty High volume Melling oil pump.
11. Heavy duty steel collar oil shaft.
12. Heavy duty oil pickup screen.
13. High quality Speed pro hypereutectic pistons.
14. P.E.R.® Seal Power HP plasma moly rings.
15. Brass freeze plug kit, gallery plug kit.
16. High quality rear main seal double lip polyacrylate.
17. Fel Pro PermaTorque heavy duty gaskets and gasket set.
18. King or Clevite Main bearings, Real Tri metal, high quality.
19. King or Clevite Rod bearings, Real Tri metal, high quality.
20. New ARP Rod Bolts and nuts installed.
21. Cam bearings, high quality 360 Set.

MACHINE LABOR includes:

1. P.E.R.® 4-Angle Valve Job.
2. Mill-matching Surface head.
3. Heavy duty thick wall Bronze valve guides.
4. Valve guides custom cut for posi-seal.
5. Blocks are furnace burned to thoroughly clean the engine blocks, and then are shot abraided.
6. Jet vat block and magnifluxing.
7. >Remove and replace all freeze plugs.
8. Remove and replace gallery plugs.
9. Remove and replace cam bearings.
10. Custom centerline boring of block, if needed, at an extra cost.
    True 90 degree V8 centerline boring.
11. Power hone to fit pistons and rings.
12. Custom crank Micro polish radius oil holes.
13. Rods pressed off, then heat fitted.
14. Rods checked for alignment ARP rod bolts installed.
15. Street Race balancing.

For any changes needed, just call and we will build a custom engine package for you with the horsepower you want. You can also change the color, choosing from over 25 different colors.

Warranty, Deposit and Shipping Info:

This engine has a one year written warranty. Buyer pays actual shipping costs if unable to pick up engine from our shop in Phoenix AZ. Some state freight restrictions apply. DEPOSIT REQUIREMENT IS 60% DOWN, PAYMENT IN FULL WHEN ENGINE IS DONE. (GET A DISCOUNT WITH A DIRECT DEPOSIT!) We accept Visa, Mastercard, Discover, American Express, money orders, cashier's checks, and direct deposit. Business or personal checks must clear prior to shipping. Arizona residents must add 8.6% sales tax.
Please call for core requirements.
         

Call to order this engine:
602-866-8044
Monday through Thursday: 8:30am - 5:00pm
Friday 08:30am - 4:00pm
Saturday: BY APPOINTMENT ONLY
Sunday: Closed
Times listed are Arizona (Mountain Standard time year round.)

DID YOU KNOW?
At Phoenix Engine, every Power Engine® is CUSTOM rebuilt in our machine shop by P.E.R.® professionals, from start to finish. The Power Engine® Performance Combination was developed from our over 50+ years of experience on MUSCLECARS, STREET STRIPS, CUSTOM TRUCKS, 4x4s, HOT RODS, CUSTOM MODS, JEEPS, and RESTORATIONS. Established in 1973, PhoenixEngine.com has built over 250,000 quality engines to date.

Please be sure to read our full Disclaimer: CLICK HERE.

Latest: 08/08/2025
6/9/25 txt
6/10/25
8/4/25 txt
8/6/25 txt
8/7/25 vid,txt

* Note: When we custom build your engine, you can choose from 25 different colors or you can supply the paint to have your engine painted the same color as your car's finish!

Please note that photos may vary slightly from actual shipped product as all our engines are custom built.