MAIN PHONE NUMBER: 602-866-8044

THIS IS THE FORD-21 PAGE.

FORD BRONCO AND 4x4 460ci TURNKEY ENGINES AND ALUMINUM HEAD 460CI ENGINES:

These turnkey engines are some of the best street engines around!

FORD 460ci TURNKEY Engine Pricing:

Ford 460ci 350 HP: from $5295 for a turnkey engine, depending upon parts used. Parts must be able to match HP application.
— 400 ft/lbs torque
(dual pattern cam)
(This engine comes with a Pertronix distributor and coil. The MSD 2-pack or MSD 3-pack distributor and coil is extra.)

Ford 460ci 375 HP: from $5495 for a turnkey engine, depending upon parts used. Parts must be able to match HP application.
— 429 ft/lbs torque
(dual pattern cam)
(This engine comes with a Pertronix distributor and coil. The MSD 2-pack or MSD 3-pack distributor and coil is extra.)

Ford 460ci 406 HP: from $5995 for a turnkey engine, depending upon parts used. Parts must be able to match HP application.
— 440 ft/lbs torque
(dual pattern cam)
(This engine comes with the Pertronix distributor and coil. The MSD 2 or MSD 3-pack distributor and coil is extra.)

Ford 460ci 427 HP: from $6395 for a turnkey engine, depending upon parts used.
— 448 ft/lbs torque
(dual pattern cam)
(This engine comes with the Pertronix distributor and coil. The MSD 2 or MSD 3-pack distributor and coil is extra.)

Ford 460ci 452 HP: from $6695 as a turnkey engine, depending upon parts used. Parts must be able to match HP application.
— 460 ft/lbs torque
(dual pattern cam)
(This engine comes with a Pertronix distributor and coil. The MSD 2-pack or MSD 3-pack distributor and coil is extra.)

Ford 460ci 461 HP: from $7195 as a turnkey engine, depending upon parts used. Parts must be able to match HP application.
— 465 ft/lbs torque
(single pattern cam)
(This engine comes with a Pertronix distributor and coil. The MSD 2-pack or MSD 3-pack distributor and coil is extra.)

Ask about pricing for our Ford 429ci turnkey engines!!

CALL US ABOUT OUR 4x4 CUSTOM ENGINES (PRICING NOT LISTED HERE) - THEY ARE VERY POPULAR! IRON HEAD MOTORS OR ALUMINUM HEAD!!

Ford 460ci Aluminum Head TURNKEY engines:

Ford 460ci 465 HP: from $ 8695 — 475-485 ft/lbs torque
(single or dual pattern cam available)

Ford 460ci 490 HP: from $ 9195 — 490-500 ft/lbs torque
(single or dual pattern cam available)

Ford 460ci 505 HP: from $ 9695 — 505-515 ft/lbs torque
(single or dual pattern cam available)

Ford 460ci 514 HP: from $ 10395 — 521-530 ft/lbs torque
(single or dual pattern cam available)

Ford 460ci 535 HP: Call for pricing on this radical engine — 540 ft/lbs torque
(single or dual pattern cam available)

Ford 460ci 560 HP: Call for pricing on this radical engine — 565 ft/lbs torque
(single or dual pattern cam available)

(A "Crate Engine" means "Intake to Pan." NOTE: These engines are now sold only in turnkey packages, so they are termed "Turnkey Engines.")

NOTICE: We can also build any of these packages for your 427 or 429 ci engine!

Click HERE to learn more about FAST TRACK!

Ask about our Fast Track Startup:
That means this engine can be Real Ready to Run OUT OF THE BOX if you choose our Fast Track startup, which includes break in, super tuning, jetting, and more.

WATCH THIS SHORT VIDEO:

We are a Holley Sniper 4 Barrel Injection System Dealer. If you are interested in the 4 barrel Holley Sniper throttle body injection computer system, these are available on all of our carburated four barrel based intake manifolds. For the additional cost and sale pricing give us a call.

This engine was built from one of our Dyno packages, which was Dyno tested on a real Super Flow. Remember, most sellers on the web do NOT test on a Dyno!! Your specific engine can be Dyno tested for an additional charge.

This Power 4® engine combination would be a great replacement mild street for a BRONCO, 4x4, Mustang, Cougar, Fairlane, Gran Torino.

The engine has a fair to mid idle, a Comp or Howards Cam Kit cam that puts out 406 HP at 4400 rpm and 440+ ft lbs of torque.

You will need a speed stall converter. This is an excellent engine for every day driving!

Use this engine for your musclecar, street, hot rod, kit car, custom truck, 4X4 or Jeep. It has a GREAT OLD SCHOOL SOUND.

Call us for higher horsepower; we will custom hand build exactly the engine you need!

For Bronco, 4x4, JEEP or Ford 4-wheel drive Trucks

SPECIAL FEATURES:

1. This engine is a Seasoned Block, hand picked.
2. SEAL POWER PISTONS 8.5, 8.9, 9.0, 9.1, 9.2, 9.4, 9.6, 9.8 compration ratios.
   10.1 or higher compression ratios are forALUMINUM HEAD applications.
3. New aftermarket Edelbrock Performer, Weiand, Top Street, Holley, etc aluminum dual plane intake manifold.
   Note: Lower horsepower engines have 4 barrel iron intake manifolds.
4. ASK US ABOUT AN ALUMINUM HEAD UPGRADE FOR YOUR BIG BLOCK FORD!
   
5. New Edelbrock RPM dual plane intake manifold for higher horsepower. (Please call.)
   
6. Edelbrock 600 CFM carburetor OR
   Edelbrock 650 CFM carburetor OR
   Edelbrock 750 CFM carburetor, depending upon HP and application.
   
7. Holley 600 CFM carburetor OR
   Holley 650 CFM carburetor OR
   Holley 750 CFM carburetor, depending upon HP and application.
   
8. Choice of 5 distributors:
   Pertronix Stage 1 is included in price;
   Pertronix Billet Stage 2 is extra;
   Pro Street HEI distributor is included;
   MSD 2 pack is extra;
   MSD 6AL 3 pack is extra.
   
9. Plug wires and spark plugs.
   
10. New chrome air cleaner included. Custom air cleaner extra.
    
11. Water pump is standard, high volume is extra. You will need to keep and use your own water pump and balancer pulleys.
    
12. New aftermarket aluminum intake manifold: Edelbrock, Weiand, TopStreet, or Holley, etc.
    Smaller horsepower engines come with iron 4 barrel intakes.
    
13. Large 460 Beam forged rods, size 6.605, with ARP rod bolts.
    Note: smaller horsepower engines have machined rods and new rod nuts.
    
14. NODULAR CRANK Pro Turn micro polished.
    
15. Heavy duty roller timing chain high performance, Melling.
    
16. Chrome valve covers, Aluminum timing cover.
    
17. New 5 qt steel oil pan.
    6 and 7+ qt pans, 4x4 pans are extra.
    
18. New P.E.R. high performance harmonic balancer.
    
19. 460 pulleys are not available; will have to use your own.
    We will use house pulleys to run the engine.
    
20. Fuel pump not included.
    
21. Starter not included.
    
22. Engine WILL RUN on premium unleaded fuel.
    
23. Built from one of our Dyno tested and road proven engine packages. Your specific engine can be Dyno tested for an additional charge.
    
24. Call for info on flex plate or fly wheel.
    
25. Call for correct flex plate on automatics.
    
26. Call for info on standard transmissions (4, 5, or 6 speed, etc.)
    
27. Comes complete, intake to oil pan. Some assembly may be needed.
    
    

ENGINE PARTS include:

1. Power 4® Comp or Howards Cam kit: Hydraulic flat tappet 513 intake lift, 520+ exhaust valve lift.
2. Power 4®Seal Power, Comp or Howards lifters
3. New Valves: 2.080 Intake valves, 1.650 exhaust valves
   GREAT Old School sound!
4. Trick Flow spring set, heavy duty.
5. New hardened exhaust seats for use with leaded or unleaded fuel.
6. New 1.440 high performance springs set to match cam.
7. New spiral type valve guides for better oil retention.
8. New Premium Viton polyacrylate valve seals for high temperature.
9. Hardened push rods, rocker arm assembly.
10. Edelbrock Performer RPM Aluminum Intakes
11. Heavy duty roller timing chain, Melling
12. Premium positive valve seals, Blue Viton
13. Controlled internal oil system (a PER exclusive!)
14. Heavy duty Melling high volume oil pump
15. Heavy duty steel collar oil shaft
16. Heavy duty oil pickup screen
17. High quality Seal Power pistons 9.1
18. P.E.R.® Seal Power high performance plasma molly rings
19. Brass freeze plug kit, gallery plug kit
20. High quality rear main seal double lip polyacrylate
21. Fel Pro PermaTorque heavy duty gaskets and gasket set
22. King or Clevite Main bearings, Real Tri metal, high quality
23. King or Clevite Rod bearings, Real Tri metal, high quality
24. New ARP Rod Bolts and nuts installed
25. Cam bearings, high quality 360 Set
    
    

MACHINE LABOR includes:

1. P.E.R.® 4-Angle valve job
2. Mill-matching surface heads to ensure positive sealing between block deck and head
3. Heavy duty thick wall valve guides
4. Valve guides custom cut for posi-seals
5. Blocks are furnace burned to thoroughly clean the engine blocks, and then are shot abraided.
6. Jet vat block and magnifluxing
7. Remove and replace all freeze plugs
8. Remove and replace gallery plugs
9. Remove and replace cam bearings
10. Custom centerline boring of block, if needed, for an extra cost.
    True 90 degree V8 centerline boring
11. Power hone to fit pistons and rings
12. Custom crank Micro polish radius oil holes
13. >Rods pressed off, then heat fitted
14. Rods checked for alignment ARP Rod Bolts  Installed
15. Spin balancing and blueprinting

-------------------------------

Call PhoenixEngine.com today to order!
Telephone: 602-866-8044

COMES COMPLETELY ASSEMBLED, INTAKE TO PAN.

All our engines are custom HAND BUILT by professionals in our machine shop!

For any changes needed, just call and we will build a custom engine package for you with the horsepower you want. You can also change the color, choosing from over 25 different colors.

Warranty, Deposit and Shipping Info:

This engine has a one year written warranty. Buyer pays actual shipping costs if unable to pick up engine from our shop in Phoenix AZ. Some state freight restrictions apply. DEPOSIT REQUIREMENT IS 60% DOWN, PAYMENT IN FULL WHEN ENGINE IS DONE. (GET A DISCOUNT WITH A DIRECT DEPOSIT!) We accept Visa, Mastercard, Discover, American Express, money orders, cashier's checks, and direct deposit. Business or personal checks must clear prior to shipping. Arizona residents must add 8.6% sales tax.
Please call for core requirements.
         

Call to order this engine:
602-866-8044
Monday through Thursday: 8:30am - 5:00pm
Friday 08:30am - 4:00pm
Saturday: BY APPOINTMENT ONLY
Sunday: Closed
Times listed are Arizona (Mountain Standard time year round.)

DID YOU KNOW?
At Phoenix Engine, every Power Engine® is CUSTOM rebuilt in our machine shop by P.E.R.® professionals, from start to finish. The Power Engine® Performance Combination was developed from our over 50+ years of experience on MUSCLECARS, STREET STRIPS, CUSTOM TRUCKS, 4x4s, HOT RODS, CUSTOM MODS, JEEPS, and RESTORATIONS. Established in 1973, PhoenixEngine.com has built over 250,000 quality engines to date.

Please be sure to read our full Disclaimer: CLICK HERE.

txt 6/9/25
6/10/25 txt
8/3/25 txt
8/6/25 txt
8/7/25 txt, rem/repl vid

Click photo to enlarge

Click photo to enlarge

Click photo to enlarge

Click photo to enlarge

Click photo to enlarge


Click photo to enlarge


Click photo to enlarge


Click photo to enlarge


Click photo to enlarge


Click photo to enlarge


Click photo to enlarge


Click photo to enlarge


Click photo to enlarge


Click photo to enlarge


Click photo to enlarge

Click photo to enlarge

Click photo to enlarge

Click photo to enlarge

Click photo to enlarge


Click photo to enlarge

5/15/24 7/2/24

* Note: When we custom build your engine, you can choose from over 25 different colors or you can supply the paint to have your engine painted the same color as your car's finish!

Please note photos may vary from actual product as all our engines are custom built.