CHEVY 350 — 325/335/345 HP-C
MIDNIGHT CRATE ENGINE
with COMPUTER TBI
Great for your musclecar,street rod, truck, 4x4 or
2 bolt seasoned heavy
duty Chevy small block.
Engine will run on unleaded fuel.
A "Crate Engine" means "Intake
to Pan." Just give us a call if you'd like this engine
in a TURNKEY package!
Turnkey package includes
custom chip, blueprinted throttle body, distributor,
plugs, and spark plug wires. Additional cost for a turnkey
package is varied, depending upon your vin code and
your chip's alpha code. See pricing below.
Please note this Power Engine will NOT work with just a custom chip. These engines
are only sold with turnkey packages. We
recommend the whole turnkey package because of mileage and wear. (Note: Does
not include serpentine pulley system.)
350ci 325 HP = $ 2795
Additional cost for turnkey package = $1195 to $1295
350ci 335 HP = $ 2895
Additional cost for turnkey package = $1195 to $1295
350ci 345 HP = $ 2995
Additional cost for turnkey package = $1295 to $1395
350ci 325 HP = torque spec up to 388 ft lbs
350ci 335 HP = torque spec up to 392 ft lbs
350ci 345 HP = torque spec up to 405 ft lbs
Note: The 325 and 335 HP motors can
be emission-friendly in most states. The 340 HP is NOT
We are in the process of dyno testing this engine! One of
our new upgrades - please remember we are one of the few
in the country that can dyno test TBI (throttle body injection)
engines, and TPI (tune port injection) engines.
Please note that upgraded computer
chips are required for your best mileage and performance.
The unique advantage with these are the engines will
run on pump gas!
SALE SPECIAL: We are now offering
these same engines with the Second Generation Vortec head,
which is from 1996 to 2002 with the 8-bolt intake. Please
note that the 8-bolt intake is an extra cost. The upgrade
for the heads on this motor is $395.
For Chevy truck and car applications; has
EGR hookup for emissions but must have modified chip and
upgrades. (Note: not legal in some states.)
our Fast Track Startup:
That means this engine can
be Real Ready
to Run OUT OF THE BOX if
you choose our Fast Track startup, which includes
break in, super tuning with a house carburetor
and distributor. We have designed
a custom CNC adaptor that bolts on the TBI intake
so we can bolt on a 4 barrel carburetor to do the
initial break-in. This provision allows us to break
in the cam, adjust the valves, re-torque the heads,
and do a thorough inspection of the engine during
the break-in process. Also realize that we use
a fast fuel computer system to tune the engine
with the computerized cam that is in the motor
we have chosen for your application. We also degree
our cams, which 90% of other companies
do not take the time to do.
Please note that we have been GM, truck, car, Corvette, and throttle body injection
and tune port injection specialists and innovators for these types of engines
for many years.
you choose a Fast Track Start Up, we have
special pricing right now!
HERE to learn more
FAST TRACK, and
to view a sample video.
Special features on this crate engine
include these new parts and more: (Be
sure to scroll down the page to see a more detailed
This engine has the First
Generation Vortec Heads.
NEW T.B.I. - Throttle Body Injection
Manifold by Edelbrock. See below for
EGR hook up for emission, Recommend modified
(note: not legal in some states)
COMPUTER controlled Hydraulic
Ask about our computer controlled
SEAL POWER HYPEREUTECTIC PISTONS
Steel forged rods, Nodular crank.
valve covers, Steel timing chain cover
8" Harmonic Balancer
Flex plate for automatic
5 qt oil pan included
(7 qt oil pan extra)
steel timing cover with correct timing
flag pointer for correct base timing.
Please call for details. (Updated photos
coming - we do not install chrome timing
covers any longer.)
To obtain these types
HP, engines were tested with a TBI 52
mm SBC TBI throttle body. This is called
base CFM range 670, 700, to 800+ CFM
(cubic feet per minute).
Requirement for the
50 to 52 mm throttle body: the intake
manifold has to be counter bored to 52
mm intake bore size. This corrects the mating
of the throttle body and intake.
For larger volume throttle
bodies a 52 mm intake (Edelbrock) must
be bored for these large horsepower engines.
Larger fuel pump required.
Standard stock intake is only 46 mm and
will not work with these bigger engines.
- For an additional charge, get
roller tip rockers and molly push rods! From
$199.95 to $249.95
When you call to order
your engine, we can give you the technical advice
needed to create a correct
Comes Completely assembled.
Ask about our UPGRADED ROLLER
One of the unique facts about Roller Cam combinations is
the strong mid range and top end torque it produces along
with great roller reliabilty of the engine. This Roller Cam
Combo has Low to Mid Pulling capabilities.
Please give us a call for your
application. Roller Cams improve power and mileage and reduce
friction and wear to create less engine
heat and wear each year. We are selling more and
more Roller Cam Engines. When you have one, you'll realize
would be GREAT in your Muscle Car, Street Rod, Truck,
4x4, or Jeep. This engine
will run on unleaded fuel.
This is a 2 bolt seasoned
heavy duty Chevy small block. (4 bolt heavy duty blocks also
available for additional fee.)
For any changes needed,
just call and we will build a custom engine package
for you with the horsepower you want. You can also change
the color, choosing from over 25 different colors.
ALL OUR ENGINES 327- 350- 383- 396- 427- 454 ARE CUSTOM HAND
Call to order this engine:
Toll Free 1-888-766-8044
08:00am - 5:30pm Monday - Friday
09:00am - 1:00pm Saturday
Times listed are Arizona time (-7 GMT).
Arizona does not observe Daylight Savings Time. We are on MST all year round.
This Power 2® Engine is
Totally REBUILT in our Machine Shop by Professionals from
start to finish. The Power 2® Engine Performance Combination
was developed from our over 44 years of experience on MUSCLECARS,
STREET, STRIPS, HOT RODS, CUSTOM TRUCKS, 4x4s, KIT CARS,
CUSTOM TRUCKS and JEEPS. PhoenixEngine.com has
built over 140,000 quality engines to date.
Warranty and Shipping Info:
This engine has a one year written warranty.
Buyer pays actual shipping costs if unable to pick up engine
from our shop in Phoenix AZ. Some state freight restrictions
apply. Payment due in full prior to shipping. We accept Visa, Mastercard, Discover,
money orders, cashier checks and direct deposit. (GET
A DISCOUNT WITH
A DIRECT DEPOSIT!) Business or personal checks must
clear prior to shipping. Arizona residents must add 8.3%
Call for core information.
SPECIAL PROMO!! Call
NOW for FREE SHIPPING to Southern California! We also
offer super shipping rates to all 48 continental states.
Ask about shipping to Hawaii, Alaska, and international
What comes with your Power 2® engine?
Here's a listing of the parts and machine labor for your
Power2® engine from PhoenixEngine.com.
YOUR POWER 2® ENGINE
- Power 2® computer
- Power 2® hydraulic
lifters, Seal Power
- Power 2® spring
set, heavy duty ( 910 to 960 series spring sets
- Edelbrock Throttle Body Injection Intake
- Heavy Duty Stem steel intake valves 194
- Heavy Duty Stem steel exhaust valves 1.5
- Premium positive valve seals, polyacrylate
- Heavy duty roller timing chain
- Controlled internal oil system (a PER exclusive!)
- Heavy duty oil pump
- Heavy duty steel collar oil shaft
- Heavy duty oil pickup screen
- High quality Seal Power American made hypereutectic
- P.E.R.® High
Performance SP plasma molly rings
- Brass freeze plug kit
- High quality rear main seal double lip polyacrylate
- Fel Pro PermaTorque heavy duty gaskets and gasket
- Clevite Main bearings, Tri metal, high quality
- Clevite Rod bearings, Tri metal, high quality
- New rod nuts installed
- Cam bearings, high quality 360 Set
POWER 2® ENGINE MACHINE LABOR includes:
- P.E.R. 3-angle® valve
- Mill-matching surfaced heads
- Heavy duty thick wall valve guides
- Valve guides custom cut for posi-seals
- Jet vat block and magnifluxing
- Remove and replace all freeze plugs
- Remove and replace gallery plugs
- Remove and replace cam bearings
- Custom centerline boring of block
True 90 degree V8 centerline boring
- Power hone to fit pistons and rings
- Custom crank micro polish radius oil holes
- Rods pressed off, then heat fitted
- Rods checked for alignment
- Street balancing
today to order!
Toll Free: 1-888-766-8044
Disclaimer: Please note
that some parts are based on availability. The brand
names listed above are guidelines; the exact brand name
may not be available at the time we build your engine.
Pricing is deemed to be correct at time of posting,
but is not guaranteed. It is listed as a guideline only.
Please call us for complete pricing on the engine built
to your specific requirements.
6/3/14 txt (140K engines & 44 yrs)
7/2/14 txt & pc
* Note: When we custom build your engine,
you can choose from over 25 different colors or you can
supply the paint to have your engine painted the same color
as your car's finish!
Please note photos may vary from actual product as all our engines
are custom built.